Part X — Greenhouse Gas Emissions from International Aviation — CORSIA

Division II — Monitoring

Emissions Monitoring Plan

(1)

Within 90 days after the day on which a private operator or air operator becomes subject to this Part, the operator must submit to the Minister for approval an emissions monitoring plan for its flights between contracting states — other than flights referred to in subsection 1000.02(4) — that are conducted using one or more large aeroplanes.

(2)

The plan must contain the information referred to in subsections 1020.10(1) to (3) of the CORSIA Standard.

(3)

The private operator or air operator must choose one of the following monitoring methods:

(a)

in the case of flights between states referred to in subsection 1020.10(4) of the CORSIA Standard,

(i)

a method described in subsection 1020.03(1) or (2) of the CORSIA Standard, if the annual CO₂ emissions from those flights are less than 50 000 t, or

(ii)

a method described in subsection 1020.03(1) of the CORSIA Standard, if the annual CO₂ emissions from those flights are equal to or greater than 50 000 t; or

(b)

in any other case, a method described in subsection 1020.03(1) or (2) of the CORSIA Standard.

(4)

A private operator or air operator whose emissions monitoring plan was approved by the Minister before January 1, 2021 must submit to the Minister, no later than February 28, 2021,

(a)

if the monitoring method identified in that plan meets the requirements of subsection (3), the information referred to in paragraphs 1020.10(2)(g), (i), (j) and (k) of the CORSIA Standard; or

(b)

if the monitoring method identified in that plan does not meet the requirements of subsection (3), an amended plan for approval that identifies a method chosen in accordance with subsection (3) and contains the information referred to in subsection (2).

SOR/2018-240, s. 2; SOR/2020-275, s. 2

💬 Discussion (0 comments)

Approval

1000.11 history

The Minister must approve the emissions monitoring plan if

(a)

the information referred to in subsection 1000.10(2) is provided;

(b)

a monitoring method is chosen in accordance with subsection 1000.10(3); and

(c)

the information referred to in subsections 1020.10(2) and (3) of the CORSIA Standard and submitted in accordance with section 1000.10 is consistent with the chosen monitoring method and the activities of the private operator or air operator, as applicable.

SOR/2018-240, s. 2; SOR/2020-275, s. 2

💬 Discussion (0 comments)

Amendment

1000.12 history

(1)

Subject to subsection (2), if any of the information referred to in subsection 1020.10(2) of the CORSIA Standard is amended, the private operator or air operator must submit an amended emissions monitoring plan to the Minister for approval before it is implemented.

(2)

If the information referred to in paragraph 1020.10(2)(i), (j) or (k) of the CORSIA Standard is amended, the private operator or air operator must submit an amended emissions monitoring plan to the Minister for approval no later than September 30 of the year preceding the beginning of the next compliance period.

(3)

If there is a change to the information referred to in subsection 1020.10(1) of the CORSIA Standard, the private operator or air operator must submit the updated information to the Minister without delay.

(4)

If the annual CO₂ emissions from a private operator’s or air operator’s flights between states referred to in subsection 1020.10(4) of the CORSIA Standard increase to an amount equal to or greater than 50 000 t for two consecutive years, the operator must choose a monitoring method in accordance with subparagraph 1000.10(3)(a)(ii) and submit an amended emissions monitoring plan to the Minister for approval before it is implemented and no later than September 30 of the year following the two consecutive years of increased emissions.

(5)

If the annual CO₂ emissions from a private operator’s or air operator’s flights between states referred to in subsection 1020.10(4) of the CORSIA Standard decrease to an amount less than 50 000 t for two consecutive years, the operator may choose a different monitoring method in accordance with subparagraph 1000.10(3)(a)(i) and, if a different monitoring method is chosen, must submit an amended emissions monitoring plan to the Minister for approval before it is implemented and no later than September 30 of the year following the two consecutive years of decreased emissions.

SOR/2018-240, s. 2; SOR/2020-275, s. 2

💬 Discussion (0 comments)

Implementation of Monitoring Plan

1000.13 history

(1)

Subject to subsection (5), a private operator or air operator must implement its emissions monitoring plan as soon as it is approved.

(2)

Subject to subsections (3) to (5), the private operator or air operator must use the monitoring method identified in its approved emissions monitoring plan for at least an entire compliance period.

(3)

If a private operator or air operator changes its monitoring method in accordance with subsection 1000.12(4) or (5), the operator must use the new method beginning on January 1 of the year after the year in which the amended emissions monitoring plan is approved.

(4)

If a private operator or air operator changes its monitoring method as a corrective measure taken under subparagraph 1000.15(1)(a)(ii), the operator must use the new method as soon as its amended emissions monitoring plan is approved.

(5)

A new entrant must implement its approved emissions monitoring plan on January 1 of the year after the year during which the new entrant becomes subject to this Part.

SOR/2018-240, s. 2; SOR/2020-275, s. 2

💬 Discussion (0 comments)

Data Gaps — Threshold

1000.14 history

A private operator or air operator that uses a monitoring method described in subsection 1020.03(1) of the CORSIA Standard must not have data gaps related to fuel quantities in respect of more than 5% of its flights between states referred to in subsection 1020.10(4) of the CORSIA Standard.

SOR/2018-240, s. 2; SOR/2020-275, s. 2

💬 Discussion (0 comments)

Data Gaps — Requirements

1000.15 history

(1)

If there are data gaps in respect of a private operator’s or air operator’s flights between states referred to in subsection 1020.10(4) of the CORSIA Standard, the operator must,

(a)

if the gaps are in respect of more than 5% of those flights,

(i)

notify the Minister of the reasons for the gaps within three months after the day on which it becomes aware of those gaps,

(ii)

take corrective measures before submitting the verified emissions report referred to in section 1000.30, which may include changing the monitoring method if an amended emissions monitoring plan is submitted to the Minister in accordance with section 1000.12 and the Minister approves it, and

(iii)

fill in the gaps before submitting the verified emissions report referred to in section 1000.30 using one of the monitoring methods described in subsection 1020.03(1) of the CORSIA Standard, which is to be pre-approved by the Minister if the requirements related to that method are met; or

(b)

if the gaps are in respect of no more than 5% of those flights,

(i)

take corrective measures, and

(ii)

fill in the gaps using one of the monitoring methods described in section 1020.15 of the CORSIA Standard before submitting the verified emissions report referred to in section 1000.30.

(2)

If there are data gaps in respect of a private operator’s or air operator’s flights between contracting states other than the flights between states referred to in subsection 1020.10(4) of the CORSIA Standard, the operator must

(a)

take corrective measures; and

(b)

fill in the gaps using one of the monitoring methods described in section 1020.15 of the CORSIA Standard before submitting the verified emissions report referred to in section 1000.30.

SOR/2020-275, s. 2

💬 Discussion (0 comments)

← Division I — General Division III — Offsetting →